{"title":"Porsche 992 Chassis","description":null,"products":[{"product_id":"exhaust-catted-downpipe-for-19-24-porsche-911-carrera-992-1-3-0t-25-porsche-911-carrera-992-2-with-heat-shield-1","title":"VCTR Performance Porsche 911 992 Carrera Catted Downpipes","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe Porsche 911 992's factory downpipes carry OPF filters that limit post-turbo flow. This high-flow catted kit replaces them with less restrictive catalysts, improving exhaust flow and turbo spool while retaining catalytic function — with a heat shield for protection.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-flow catalyst significantly less restrictive than the factory pre-cat or OPF\u003c\/li\u003e\n  \u003cli\u003eImproved exhaust flow and turbo response versus the OEM downpipe\u003c\/li\u003e\n  \u003cli\u003eRetains catalytic converter — better suited to road-registered vehicles\u003c\/li\u003e\n  \u003cli\u003eStainless steel construction for durability\u003c\/li\u003e\n  \u003cli\u003eMore defined exhaust tone on tuned applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngineering Focus\u003c\/h3\u003e\n\n\u003cp\u003eSS304 stainless steel with high-flow OPF replacement catalysts and heat shields. Covers both 992.1 (2019–2024) and 992.2 (2025+) applications.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt for the Drive, Not Just the Dyno\u003c\/h3\u003e\n\n\u003cp\u003eThe OPF on the 992 is a noise- and emissions-compliance part first, an exhaust component second. This kit removes that restriction while keeping a real catalyst in place, so the car stays road-legal and gains the turbo response the 3.0T flat-six has been holding back the whole time.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePorsche 911 Carrera 992.1 3.0T (2019–2024)\u003c\/li\u003e\n  \u003cli\u003ePorsche 911 Carrera 992.2 3.0T (2025+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eTuning is recommended to fully benefit from the improved exhaust path.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHigh-flow catted downpipe pair\u003c\/li\u003e\n  \u003cli\u003eHeat shields\u003c\/li\u003e\n  \u003cli\u003eSupplied gaskets and installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMaterial: SS304 Stainless Steel\u003c\/li\u003e\n  \u003cli\u003eCatalyst: High-flow OPF replacement\u003c\/li\u003e\n  \u003cli\u003eFeatures: Heat shields included\u003c\/li\u003e\n  \u003cli\u003eEngine: 3.0T flat-six twin-turbo\u003c\/li\u003e\n  \u003cli\u003eFitment: OEM flange replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Fit\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirmed fitment by chassis and engine code before you buy, not after\u003c\/li\u003e\n  \u003cli\u003eWorldwide shipping, cost calculated at checkout for your destination\u003c\/li\u003e\n  \u003cli\u003eAustralian Consumer Law returns on all unused, unfitted parts\u003c\/li\u003e\n  \u003cli\u003eQuestions about your specific build? Message us — real people, real platform knowledge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery \u0026amp; Support\u003c\/h3\u003e\n\n\u003cp\u003eYour order is carefully inspected before dispatch and backed by VCTR Performance support. For product availability, shipping estimates or fitment assistance, contact our team.\u003c\/p\u003e","brand":"VCTR Performance","offers":[{"title":"VCTR Performance \/ VCTR Performance","offer_id":52080756556096,"sku":"100007928:-1#silver;191284006:-1#53*38*22cm","price":1729.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/ChatGPTImageMay31_2026_09_11_24PM.png?v=1780225903"},{"product_id":"vctr-performance-porsche-911-992-turbo-turbo-s-forged-carbon-end-tank-intercooler","title":"VCTR Performance Porsche 911 992 Turbo\/Turbo S Forged Carbon End Tank Intercooler","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe factory Porsche 911 992 intercooler core is undersized for sustained hard driving. This upgraded core keeps intake air temperatures consistent lap after lap or pull after pull, where the factory unit starts to heat-soak.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eLarger core volume for improved heat rejection\u003c\/li\u003e\n  \u003cli\u003eReduced heat soak under sustained load\u003c\/li\u003e\n  \u003cli\u003eMore consistent intake air temperatures and power delivery\u003c\/li\u003e\n  \u003cli\u003eDirect-fit replacement for the factory intercooler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for the Drive, Not Just the Dyno\u003c\/h3\u003e\n\n\u003cp\u003eThe factory intercooler is sized for the average commute, not back-to-back pulls. Once heat soak sets in, power delivery gets inconsistent — this core is built to hold its temperature where the factory piece gives up.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePorsche 911 992\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eIntercooler core assembly\u003c\/li\u003e\n  \u003cli\u003eSupplied mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Fit\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirmed fitment by chassis and engine code before you buy, not after\u003c\/li\u003e\n  \u003cli\u003eWorldwide shipping, cost calculated at checkout for your destination\u003c\/li\u003e\n  \u003cli\u003eAustralian Consumer Law returns on all unused, unfitted parts\u003c\/li\u003e\n  \u003cli\u003eQuestions about your specific build? Message us — real people, real platform knowledge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery \u0026amp; Support\u003c\/h3\u003e\n\n\u003cp\u003eYour order is carefully inspected before dispatch and backed by VCTR Performance support. For product availability, shipping estimates or fitment assistance, contact our team.\u003c\/p\u003e","brand":"VCTR Performance","offers":[{"title":"VCTR Performance","offer_id":52726214623552,"sku":"200329261:-1#bar\u0026plate","price":10129.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/ChatGPTImageJul4_2026_03_14_32PM.png?v=1783142107"},{"product_id":"vctr-performance-porsche-911-992-3-0t-valved-catback-exhaust","title":"VCTR Performance Porsche 911 992 3.0T Valved Catback Exhaust","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe factory Porsche 911 992 exhaust is tuned for compliance, not character. This catback exhaust opens up the sound and improves flow through the rear section, giving the car a voice that matches what's happening under the bonnet.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMore expressive exhaust note than the factory system\u003c\/li\u003e\n  \u003cli\u003eImproved flow through the rear exhaust section\u003c\/li\u003e\n  \u003cli\u003econstruction with matched tips\u003c\/li\u003e\n  \u003cli\u003eDirect OEM-location installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for the Drive, Not Just the Dyno\u003c\/h3\u003e\n\n\u003cp\u003eThe right exhaust note is as much a part of the drive as the power delivery itself. This system is built to sound purposeful without tipping into obnoxious — a system you'll still want to hear on a cold start six months in.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePorsche 911 992\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComplete catback exhaust assembly\u003c\/li\u003e\n  \u003cli\u003eSupplied installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Fit\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirmed fitment by chassis and engine code before you buy, not after\u003c\/li\u003e\n  \u003cli\u003eWorldwide shipping, cost calculated at checkout for your destination\u003c\/li\u003e\n  \u003cli\u003eAustralian Consumer Law returns on all unused, unfitted parts\u003c\/li\u003e\n  \u003cli\u003eQuestions about your specific build? Message us — real people, real platform knowledge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery \u0026amp; Support\u003c\/h3\u003e\n\n\u003cp\u003eYour order is carefully inspected before dispatch and backed by VCTR Performance support. For product availability, shipping estimates or fitment assistance, contact our team.\u003c\/p\u003e","brand":"VCTR Performance","offers":[{"title":"VCTR Performance \/ VCTR Performance","offer_id":52726216458560,"sku":"100007928:-2#silver;191284006:-1#102*44*28cm","price":3099.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/ChatGPTImageJul4_2026_04_51_08PM.png?v=1783147904"},{"product_id":"vctr-performance-porsche-911-992-titanium-catback-exhaust-system","title":"VCTR Performance Porsche 911 992 Titanium Catback Exhaust","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe factory Porsche 911 992 exhaust is tuned for compliance, not character. This titanium catback exhaust opens up the sound and improves flow through the rear section, giving the car a voice that matches what's happening under the bonnet.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMore expressive exhaust note than the factory system\u003c\/li\u003e\n  \u003cli\u003eImproved flow through the rear exhaust section\u003c\/li\u003e\n  \u003cli\u003eTitanium construction with matched tips\u003c\/li\u003e\n  \u003cli\u003eDirect OEM-location installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for the Drive, Not Just the Dyno\u003c\/h3\u003e\n\n\u003cp\u003eThe right exhaust note is as much a part of the drive as the power delivery itself. This system is built to sound purposeful without tipping into obnoxious — a system you'll still want to hear on a cold start six months in.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003ePorsche 911 992\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComplete catback exhaust assembly\u003c\/li\u003e\n  \u003cli\u003eSupplied installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Fit\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConfirmed fitment by chassis and engine code before you buy, not after\u003c\/li\u003e\n  \u003cli\u003eWorldwide shipping, cost calculated at checkout for your destination\u003c\/li\u003e\n  \u003cli\u003eAustralian Consumer Law returns on all unused, unfitted parts\u003c\/li\u003e\n  \u003cli\u003eQuestions about your specific build? Message us — real people, real platform knowledge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery \u0026amp; Support\u003c\/h3\u003e\n\n\u003cp\u003eYour order is carefully inspected before dispatch and backed by VCTR Performance support. For product availability, shipping estimates or fitment assistance, contact our team.\u003c\/p\u003e","brand":"VCTR Performance","offers":[{"title":"VCTR Performance \/ VCTR Performance","offer_id":52726221439296,"sku":"100007928:190091186#Blue;191284006:-1#100*35*25","price":5059.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/Generatedimage1_2.png?v=1784421963"},{"product_id":"vctr-performance-porsche-911-992-3-0l-stainless-steel-exhaust-headers","title":"VCTR Performance Porsche 911 992 3.0L Stainless Steel Exhaust Headers","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe VCTR Performance 992 exhaust headers are built in 304 stainless steel for the 3.0L application. The manifold or header assembly forms the engine-side exhaust path, connecting the engine to the next stage of the system.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpgrades the engine-side exhaust assembly\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eApplication-specific connection layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for the Drive, Not Just the Dyno\u003c\/h3\u003e\n\u003cp\u003eThe exhaust starts at the engine, not the tips. Giving the header or manifold the same attention as the rest of the pipework makes sense when you're putting the system together properly.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePorsche 911 992 3.0L, listed from 2020\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust header\/manifold assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirmed fitment by chassis and engine code before you buy, not after\u003c\/li\u003e\n\u003cli\u003eWorldwide shipping, cost calculated at checkout for your destination\u003c\/li\u003e\n\u003cli\u003eAustralian Consumer Law returns on all unused, unfitted parts\u003c\/li\u003e\n\u003cli\u003eQuestions about your specific build? Message us — real people, real platform knowledge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery \u0026amp; Support\u003c\/h3\u003e\n\u003cp\u003eYour order is carefully inspected before dispatch and backed by VCTR Performance support. For product availability, shipping estimates or fitment assistance, contact our team.\u003c\/p\u003e","brand":"VCTR Performance","offers":[{"title":"VCTR Performance","offer_id":67837069033792,"sku":"100007928:-6#Silver;191284006:-1#51*38*21cm","price":1479.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/vctr-batch20-product-8-01.png?v=1792988360"},{"product_id":"vctr-performance-porsche-911-gt3-992-4-0l-catted-exhaust-headers","title":"VCTR Performance Porsche 911 GT3 992 4.0L Catted Exhaust Headers","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe VCTR Performance catted headers are designed for the 992 GT3's 4.0L exhaust layout. The manifold or header assembly forms the engine-side exhaust path, connecting the engine to the next stage of the system.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpgrades the engine-side exhaust assembly\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eApplication-specific connection layout\u003c\/li\u003e\n\u003cli\u003eCatalyst-equipped header configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for the Drive, Not Just the Dyno\u003c\/h3\u003e\n\u003cp\u003eThe exhaust starts at the engine, not the tips. Giving the header or manifold the same attention as the rest of the pipework makes sense when you're putting the system together properly.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePorsche 911 GT3 992 4.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExhaust header\/manifold assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirmed fitment by chassis and engine code before you buy, not after\u003c\/li\u003e\n\u003cli\u003eWorldwide shipping, cost calculated at checkout for your destination\u003c\/li\u003e\n\u003cli\u003eAustralian Consumer Law returns on all unused, unfitted parts\u003c\/li\u003e\n\u003cli\u003eQuestions about your specific build? Message us — real people, real platform knowledge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery \u0026amp; Support\u003c\/h3\u003e\n\u003cp\u003eYour order is carefully inspected before dispatch and backed by VCTR Performance support. For product availability, shipping estimates or fitment assistance, contact our team.\u003c\/p\u003e","brand":"VCTR Performance","offers":[{"title":"VCTR Performance","offer_id":67837220815168,"sku":"200257284:-1#66*51*22cm","price":4069.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/vctr-studio-992-gt3-catted-headers-01.png?v=1793000785"},{"product_id":"vctr-performance-porsche-911-992-3-0l-3-7l-billet-aluminium-intake-plenum","title":"VCTR Performance Porsche 911 992 3.0L\/3.7L Billet Aluminium Intake Plenum","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe VCTR Performance billet aluminium intake plenum is designed for the 992 911's 3.0L and 3.7L applications. The replacement assembly gives the intake build a dedicated manifold or plenum matched to the engine's inlet connections.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet aluminium construction\u003c\/li\u003e\n\u003cli\u003eReplacement intake plenum\u003c\/li\u003e\n\u003cli\u003eDesigned for the 992 inlet layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for the Drive, Not Just the Dyno\u003c\/h3\u003e\n\u003cp\u003eAirflow through the engine is a complete path. The manifold or plenum is part of how that air reaches the engine, so it belongs in the plan alongside the inlet hardware and any supporting changes.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePorsche 911 992 3.0L\/3.7L applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet aluminium intake plenum\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirmed fitment by chassis and engine code before you buy, not after\u003c\/li\u003e\n\u003cli\u003eWorldwide shipping, cost calculated at checkout for your destination\u003c\/li\u003e\n\u003cli\u003eAustralian Consumer Law returns on all unused, unfitted parts\u003c\/li\u003e\n\u003cli\u003eQuestions about your specific build? Message us — real people, real platform knowledge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery \u0026amp; Support\u003c\/h3\u003e\n\u003cp\u003eYour order is carefully inspected before dispatch and backed by VCTR Performance support. For product availability, shipping estimates or fitment assistance, contact our team.\u003c\/p\u003e","brand":"VCTR Performance","offers":[{"title":"VCTR Performance","offer_id":67837222420800,"sku":"200329261:-2#silver","price":2239.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/vctr-studio-992-intake-plenum-01.png?v=1793000823"},{"product_id":"vctr-performance-porsche-911-992-3-0l-catted-downpipe-kit-heat-shield","title":"VCTR Performance Porsche 911 992 3.0L Catted Downpipes — Heat Shield","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe VCTR Performance 992 catted downpipe kit pairs the 3.0L application with heat shielding. This catalyst-equipped configuration gives the exhaust build a dedicated catted pipe assembly, with the original connections and sensor arrangement retained as the fitment reference.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Upgrade?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCatalyst-equipped exhaust configuration\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for exhaust heat and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eApplication-specific pipe layout\u003c\/li\u003e\n\u003cli\u003eHeat shielding to help manage radiant exhaust heat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for the Drive, Not Just the Dyno\u003c\/h3\u003e\n\u003cp\u003eA catted exhaust build still needs the pipework, catalyst sections and adjoining system to work together. This kit keeps the catalyst as part of that setup while giving the exhaust its own dedicated assembly.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eCompatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePorsche 911 992 3.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCatted downpipe assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping \u0026amp; Fit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfirmed fitment by chassis and engine code before you buy, not after\u003c\/li\u003e\n\u003cli\u003eWorldwide shipping, cost calculated at checkout for your destination\u003c\/li\u003e\n\u003cli\u003eAustralian Consumer Law returns on all unused, unfitted parts\u003c\/li\u003e\n\u003cli\u003eQuestions about your specific build? Message us — real people, real platform knowledge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDelivery \u0026amp; Support\u003c\/h3\u003e\n\u003cp\u003eYour order is carefully inspected before dispatch and backed by VCTR Performance support. For product availability, shipping estimates or fitment assistance, contact our team.\u003c\/p\u003e","brand":"VCTR Performance","offers":[{"title":"VCTR Performance","offer_id":67837222486336,"sku":"100007928:-1#silver;191284006:-1#Catted","price":2274.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/vctr-final-15442118607168-01.png?v=1793004629"},{"product_id":"csf-racing-42mm-all-aluminium-radiators","title":"CSF Racing 42mm All Aluminium Radiators","description":"\u003cp\u003eCSF continues to lead the industry in Porsche cooling solutions with the release of its all-new High-Performance Radiator Set for 992-generation 911 models (992.1 \u0026amp; 992.2). As more 992 owners push their cars on track and in performance builds, the limitations of the factory cooling system—especially on non-center-radiator models—have become apparent. CSF’s latest radiator range (Left, Right, and Center) is engineered to provide unmatched cooling performance and reliability.\u003c\/p\u003e\n\u003cp\u003eDesigned as a true “drop-in fit” upgrade, the CSF Radiators feature an all-aluminum construction with TIG-welded tanks, high-capacity 2-row 42mm cores, and CSF’s exclusive B-Tube Technology. This design increases heat transfer efficiency by 20–25% compared to OEM radiators, ensuring optimal engine temperatures even under demanding driving conditions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Upgrade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCSF’s all-aluminum radiators significantly outperform factory plastic-tank radiators by maintaining consistent coolant temperatures and preventing heat soak under hard driving. Whether you’re chasing lap times or simply enhancing reliability, this upgrade extends engine life and ensures stable performance in every environment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineering Partnerships\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDeveloped in collaboration with world-class tuners and race teams, including M-Engineering, ES Motor, and Pacific German, the CSF 992 cooling package has been tested and proven in real-world track conditions to withstand extreme heat and boost pressure from high-powered Porsche engines.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSF vs OEM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe original OE radiators from Porsche are plastic tanks with single row aluminum cores. While this is the most common OE radiator design and generally acceptable, there is always room for improvement. To compound the factory cooling system limitation, Porsche decided to forgo the center radiator on most models (see fitment notes) except the Turbo, Turbo S, GT3, and 992.2 GTS (Hybrid). This greatly limits the thermal capacity of the system and many owners report seeing high engine temperatures on track with some overheating after a few laps.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe CSF Advantage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CSF radiators feature the latest 5mm multi-louvered fins. These fins significantly increase the heat exchange surface area improving overall cooling efficiency and recovery while still maintaining good airflow. The core is much larger than the factory featuring 2-Row 42mm aluminum core. This both increases the fluid capacity of the radiator, and improves the cores ability to dissipate heat. CSF’s Exclusive B-Tube Technology increases the heat transfer by approximately 15% over regular oval welded tubes. Combined with the new 5mm fins, heat transfer is increased by up to 25% overall. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance.\u003c\/p\u003e\n\u003cp\u003eThe TIG-Welded 100% All Aluminum construction increases the overall strength of the radiator. This improves durability and longevity so you can be confident it will hold up to hard driving conditions. The CSF radiator mounts in the factory location and requires no modifications or cutting.\u003c\/p\u003e\n\u003cp\u003eCSF always seeks to offer the ultimate cooling solution. The latest 5mm fin technology was introduced at the end of 2023 offers even more heat transfer area and thermal efficiency than CSF’s tried and true 6.5mm fins. Porsche owners are known to push their cars hard and CSF is confident this radiator is ready to take on the most demanding conditions in the world.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCenter Radiator Conversion\/Addition\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your 992 911 did not come equipped with a center radiator, it is fairly simple and straight forward to add one on. This can be done using all OEM Porsche Parts to fit the CSF #7243 Center Radiator. Please see the installation instructions section below for details on how to add a center radiator to your 992.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2019+ Porsche 992.1 \u0026amp; 992.2 Carrera (Base \/ T \/ S \/ 4 \/ 4S \/ GTS \/ 4 GTS incl. Hybrid models)\u003c\/li\u003e\n\u003cli\u003e2020–2025 Porsche 992 Turbo \/ Turbo S\u003c\/li\u003e\n\u003cli\u003e2022+ Porsche 992 GT3 \/ GT3 RS\u003c\/li\u003e\n\u003cli\u003e2023–2024 Porsche 992 Sport Classic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCSF Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLeft Radiator – #7241 (Porsche 992.121.251)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRight Radiator – #7242 (Porsche 992.121.252)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCenter Radiator – #7243 (Porsche 992.121.253 \/ 9GT.121.253)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CSF Racing","offers":[{"title":"Left Side Only","offer_id":67904048562496,"sku":"CSF7241","price":1751.95,"currency_code":"AUD","in_stock":false},{"title":"Right Side Only","offer_id":67904048595264,"sku":"CSF7242","price":1396.95,"currency_code":"AUD","in_stock":false},{"title":"Centre Only","offer_id":67904048628032,"sku":"CSF7243","price":1235.95,"currency_code":"AUD","in_stock":false},{"title":"Left\/Right\/Center Set","offer_id":67904048660800,"sku":"CSF7241-7242-7243","price":4954.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/7241-7242-7243.jpg?v=1793271358"},{"product_id":"csf-racing-high-performance-intercooler-system-csf8217","title":"CSF Racing High-Performance Intercooler System CSF8217","description":"\u003cp\u003ePorsche 992 Carrera \/ S \/ 4 \/ 4S \/ GTS (3.0T) Intercooler System\u003c\/p\u003e  \u003cp\u003eCSF designed and engineered the 992 Carrera intercooler to be a true Plug-and-Play \"Drop-in Fit\" unit. Utilizing all factory mounting points, the installation is straightforward and requires no modifications. The most important feature of the CSF by PWR 992 Carrera Intercooler System is the Formula-1 grade intercooler cores. CSF's strategic relationship with PWR has allowed the inclusion of these cores, which is unlike any other available in the performance aftermarket. These cores are the same style used in other CSF air-to-air systems previously developed for the 992 Turbo\/S and 991 GT2RS with incredible results. The PWR cores eliminate heat soak and lower Intake Air Temperatures (IATs) much more efficiently than traditional Bar \u0026amp; Plate or Tube \u0026amp; Fin designs. The traditional intercooler cores that are typically much heavier and larger to improve cooling capacity. Because the PWR core is able to achieve greater performance results in a smaller size, CSF was able to design the intercooler system to fit in the stock location using all the OEM hardware, ducts, and shrouds for an easy drop if fit installation.\u003c\/p\u003e  \u003cp\u003eThe CSF #8217 Cooling product is designed to be a \"Drop-In Fit\" applications. The product will install in the OEM Location with no modifications necessary unless otherwise noted or instructions are included in the product package. Please see the manufacturer repair manual for standard installation instructions. If you do not feel confident installing this product CSF recommends taking it to a qualified installation facility.\u003c\/p\u003e","brand":"CSF Racing","offers":[{"title":"Default Title","offer_id":67904050430272,"sku":"CSF8217","price":8910.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/CSF8217.jpg?v=1793271405"},{"product_id":"csf-racing-intercooler-system-csf8188","title":"CSF Racing Intercooler System CSF8188","description":"\u003cp\u003eCSF continues to expand coverage of its industry-leading Porsche cooling lineup with exciting news for 992.2 Owners. The CSF 992 Turbo\/S High-Performance Intercooler System fits the newly released 2025+ Porsche 992.2 Carrera models equipped with the 3.0L Turbo Engine (non-Hybrid).\u003c\/p\u003e\n\u003cp\u003eThe CSF #8188 has already established itself as the benchmark intercooler for the 992 Turbo\/S used in the highest horsepower builds in the world. Developed with strategic manufacturing partner PWR and tested under the most demanding motorsport conditions, this Billet Intercooler is the ultimate upgrade for 992.2 owners looking to maximize performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e992.2 Changes\/Updates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 992.2 generation of the 911 Carrera (including S Models) utilizes the larger turbochargers of the 992.1 GTS (OE# 0PB-145-701-R \/ 0PB-145-702-R. Larger turbos paired with the larger intercooler from the Turbo models makes for factory output on the S models the same as the outgoing GTS models.\u003c\/p\u003e\n\u003cp\u003eThe 992.1 GTS with the CSF #8217 Intercooler was capable of over 600HP on factory turbos and internals, so it is safe to say the 992.2 will be more than capable of this kind of performance. With upgraded\/larger turbos plus extra flow and cooling capacity from the larger CSF #8188 Intercooler, the 992.2 should easily exceed the limits of the 992.1 GTS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes NOT Fit 991.1 Carrera (3.0L Turbo) Models or 992.2 GTS or any other 992.2 Models with the Hybrid Electric Motor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesign \u0026amp; Engineering\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCSF designed and engineered the 992.2 Carrera intercooler to be a true Plug-and-Play “Drop-in Fit” unit. Utilizing all factory mounting points and ducting, the installation is simple and straightforward.\u003c\/p\u003e\n\u003cp\u003e992.2 owners also benefit from using a system developed for the 992 Turbo\/S gaining features like three 1\/8 NPT Ports for Methanol Injection, Boost monitoring, Nitrous, etc. The CSF #8188 is used in builds like the ES1300, ES Motor’s 1500+BHP flagship package. This system can handle anything you can throw at it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePWR Intercooler Core Technology\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe most important feature of the CSF by PWR 992.2 Carrera Intercooler System is the Formula-1 grade intercooler core. CSF’s strategic relationship with PWR has allowed the inclusion of this core, which is unlike any other available in the performance aftermarket.\u003c\/p\u003e\n\u003cp\u003eThe intercooler system was originally developed for the Porsche 992 Turbo\/S and has been proven on builds making over 1600WHP. The PWR cores eliminate heat soak and lower Intake Air Temperatures (IATs) much more efficiently than traditional Bar \u0026amp; Plate or Tube \u0026amp; Fin designs. These traditional intercooler cores are typically much heavier and\/or larger to improve cooling capacity. Because the PWR core is able to achieve greater performance results in a smaller size, CSF was able to design the intercooler system to fit in the stock location using all the OEM hardware, ducts, and shrouds for an easy drop if fit installation.\u003c\/p\u003e\n\u003cp\u003eLike most turbocharged vehicles, the 3.0L Twin Turbo motor powering the 992.2 experiences high levels of heat soak and progressively increasing IATs even in modestly spirited driving conditions. This results in the ECU pulling engine timing and drastically decreasing power output. The CSF by PWR Intercoolers solve this issue and allow vehicles to perform at optimal levels consistently and for prolonged periods of time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Results\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CSF Intercooler System has undergone rigorous testing and real world validation with leading Porsche builder, tuners, and motorsport teams. Dyno-proven results on Turbo\/S applications have shown significant reductions in IATs compared to factory and other aftermarket intercoolers. Companies like Flat 6 Motorsports, ES Motor, GMG Racing, and M-Engineering have all used the CSF system to build everything from 1600+HP roll race monsters to time attack cars. The aftermarket world has definitely proven that the CSF Intercooler is the ultimate 992 cooling solution.\u003c\/p\u003e\n\u003cp\u003eDuring development, CSF worked with both Jon and Mitch, owners and lead tuners of M-Engineering, to compare the OEM intercoolers vs. CSF’s High-Performance Intercooler System on World Motorsports‘ state-of-the-art wind tunnel dyno.\u003c\/p\u003e\n\u003cp\u003eIn the images above are charts of the data from two pulls, one with the stock intercooler system, and one with the CSF High-Performance Intercooler System. These tests started in 4th gear at 2500RPM, went through a shift into 5th, and then to redline.\u003c\/p\u003e\n\u003cp\u003eThe CSF intercooler system side-by-side comparison to the OEM, shows better results in intake air temperature (IATs) and intercooler efficiency, all while being tested in hotter conditions.\u003c\/p\u003e\n\u003cp\u003eDue to the larger and more efficient cores, the CSF intercooler system displayed a slightly higher level of pressure drop with a range of .5 to 1 psi more than the OEM system throughout the dyno test. This is generally to be expected with more surface area and more drag. Tuning can compensate for this slight change in pressure drop as well as provide maximum performance output. Increased boost pressure is the best way to take advantage of increased efficiency that the CSF by PWR High-Performance Intercooler System provides.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCNC Machined Billet End Tanks\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs with CSF’s other products produced through our PWR partnership, this Intercooler system features 100% TIG-welded machined billet aluminum end tanks. This is a very significant upgrade compared to the OEM crimped plastic composite end tanks.\u003c\/p\u003e\n\u003cp\u003eIn addition to being aesthetically pleasing, the increased strength improves longevity and durability on high-performance vehicles. OEM plastic\/composite end tanks have been known to crack under heavy boost pressure. The CNC machined billet end tanks are ready to withstand increased boost pressures from bolt-on modifications, higher performance tunes, as well as upgraded turbochargers.\u003c\/p\u003e","brand":"CSF Racing","offers":[{"title":"Default Title","offer_id":67904053117248,"sku":"CSF8188","price":9792.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/8188_1.jpg?v=1793271450"},{"product_id":"torque-solution-adjustable-rear-lower-control-arms-ts-por-906","title":"Torque Solution Adjustable Rear Lower Control Arms TS-POR-906","description":"\u003cp\u003eIntroducing the Torque Solution Adjustable Rear Lower Control Arms for the 991\/992 models. Crafted to provide up to 3 degrees of negative camber adjustment, these control arms enhance rear suspension geometry, ensuring optimal performance and handling. Made from durable 7075 billet aluminium and equipped with PTFE-lined rod ends, they offer superior strength while maintaining a lightweight design.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is straightforward as these adjustable control arms require no modifications to your chassis, making them a direct bolt-on replacement. They are perfect for those who drive their cars daily as well as for enthusiasts looking for track-ready performance. Pair them with our 991 upper camber and toe steer arms to achieve positive camber results and fully optimise your suspension setup.\u003c\/p\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":67907734995264,"sku":"TS-POR-906","price":2311.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/TS-POR-906.jpg?v=1793317077"},{"product_id":"torque-solution-adjustable-rear-drop-links-ts-por-887-70","title":"Torque Solution Adjustable Rear Drop Links TS-POR-887-70","description":"Torque Solution Rear Swaybar Drop Links are designed to eliminate the failure prone factory endlinks and allow for stiffer swaybar adjustments. This gives you more control of your suspension adjustments to take advantage of your stock or aftermarket suspension. Made with high quality Teflon Lined FK rod ends and 6061 billet aluminum ensuring these will be the last end links you'll ever have to buy. Fully adjustable with left and right hand thread rod ends and 304 stainless steel spacers. Say goodbye to the clicking and rattling noises commonly found in stock plastic end links.","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":67907735388480,"sku":"TS-POR-887-70","price":634.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/TS-POR-887-70-2.jpg?v=1793317096"},{"product_id":"torque-solution-short-rear-upper-control-arm-toe-armsteer-ts-por-442-140","title":"Torque Solution Short Rear Upper Control Arm\/Toe ArmSteer TS-POR-442-140","description":"\u003cp\u003eTorque Solution Short Rear Upper Control Arm \/ Toe Steer kit is similar to the adjustable link Porsche uses on the 991 Cup cars. A bolt in replacement for the OEM GT3 \u0026amp; Turbo toe steering mechanism. Also replaces the 991 C2 toe link. Eliminates the deflection caused by rubber bushings in the factory arms and replaces the toe steer motor that is known to overheat with hard track use.\u003c\/p\u003e\n\n\u003cp\u003eMade of 6061-T6 billet aluminium and assembled with PTFE Lined FK Rod Ends. 2 links total included in each package. Requires NO modification to chassis and is a direct bolt on replacement part. This kit is recommended for track use.\u003c\/p\u003e\n","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":67907735486784,"sku":"TS-POR-442-140","price":1042.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/TS-POR-442-140.jpg?v=1793317098"},{"product_id":"verus-engineering-ventus-1-package-a0706a-v1","title":"Verus Engineering Ventus 1 Package A0706A-V1","description":"\u003cp\u003eThe Ventus 1 package for the Porsche 992 GT3 is an entry level aerodynamic package to increase downforce and reduce lap times. This packages performance in a safe and predictable way. The dive planes improve front end downforce by creating downforce on the units themselves and improving the front fender evacuation. The radiator gurneys also improve front downforce and cooling of the factory radiator. To balance out the added front end elements, rear wing mounts that increase the AOA (Angle Of Attack) of the factory rear wing were added.\u003c\/p\u003e\n\n\u003cp\u003eThe dive planes and radiator gurneys are produced by 2x2 twill carbon fiber and adhere to the car with 3M tape. The rear wing mounts are produced by 6061-T6 aluminum.\u003c\/p\u003e\n\n\u003cp\u003eAll products were developed utilizing in-house scan data, CAD, and CFD analysis. This ensured an OEM like fit and finish as well as function as intended for performance.\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":67907754230080,"sku":"A0706A-V1","price":6396.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/Ventus_20Packages_20-_20Porsche_20992_20GT3.jpg?v=1793317387"},{"product_id":"verus-engineering-ucw-rear-wing-kit-a0425a","title":"Verus Engineering UCW Rear Wing Kit A0425A","description":"\u003cp\u003eThe UCW Rear Wing is a great addition to your Porsche 992 GT3 to increase downforce significantly in the rear, increase confidence on track, and reduce lap times. The UCW wing bolts on exactly like the factory wing, for an easy, sub 20 minute install.\u003c\/p\u003e\n\n\u003cp\u003eUtilizing state-of-the-art analysis software during the R\u0026amp;D process, we optimized the airfoil for performance for the given build volume which is derived from the V1X.  Further utilizing CFD, we ensured the rear wing sees adequate airflow while installed on the car and performs well at various angles of attack.\u003c\/p\u003e\n\n\u003cp\u003eDuring the design process; we utilized in-house scan data.  This results in a product that features an OEM fit and finish.\u003c\/p\u003e\n\n\u003cp\u003eThe UCW Rear Wing is the perfect addition to the track goer or street car enthusiast who requires a large bump in rear downforce to balance out a significant front aero package.\u003c\/p\u003e\n\n\u003cp\u003eUCW Wings are assembled per order and will ship within 5 business days from receipt of order unless otherwise specified.\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":67907757539648,"sku":"A0425A","price":7417.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/UCW_20Rear_20Wing_20Kit_20-_20Porsche_20_20992_20GT3.jpg?v=1793317424"},{"product_id":"verus-engineering-anti-buffeting-wind-deflectors-a0446a","title":"Verus Engineering Anti-Buffeting Wind Deflectors A0446A","description":"\u003cp\u003eThese are a must-have for any 992 enthusiast. The sub-woofer-like sound when rolling down the windows is mitigated with these simple add-ons. Great for track use or enjoying your Porsche with the windows down.\u003c\/p\u003e\n\n\u003cp\u003eWe developed a solution that not only alleviates the wind buffeting but looks spectacular as well. Our wind deflectors attach easily with 3M VHB Double-Sided Tape. The units are produced from multiple pieces of pre-preg carbon that are bonded together and then clear coated in an automotive high gloss finish.\u003c\/p\u003e\n\n\u003cp\u003eDuring the development phase, we used scan data obtained in-house on our shop car to ensure proper contouring of the units to the side mirror bases. We also utilized CFD to ensure the units would work as intended but also did not cause unnecessary drag and disruption to other aerodynamic devices.\u003c\/p\u003e\n\n\u003cp\u003eGet rid of the wind buffeting issues and upgrade the exterior looks of your Porsche with these simple to add units.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: These are not compatible with the 992 GT3RS.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":67907757572416,"sku":"A0446A","price":709.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/Anti-Buffeting_20Wind_20Deflectors_20-_20Porsche_20992_20GT3.jpg?v=1793317425"},{"product_id":"verus-engineering-fuel-cap-cover","title":"Verus Engineering Fuel Cap Cover","description":"\u003cp\u003eCover up the lackluster plastic gas cap that comes from the factory with our cap machined from solid aluminum. These units are machined, anodized, and then CNC machine engraved with a Porsche silhouette of your choice in the USA.\u003c\/p\u003e\n\n\u003cp\u003eThe caps are offered in three common colors.  The units install easily and in under a minute with no tools required. The units feature a retention style mounting and do \u003cstrong\u003e*not*\u003c\/strong\u003e require double-sided tape.\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Black","offer_id":67907757801792,"sku":"A0449A-BLK-992","price":161.95,"currency_code":"AUD","in_stock":false},{"title":"Blue","offer_id":67907757834560,"sku":"A0449A-BLU-992","price":161.95,"currency_code":"AUD","in_stock":false},{"title":"Red","offer_id":67907757867328,"sku":"A0449A-RED-992","price":161.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/Gas_20Cap_20Cover_20-_20Porsche_e69b3267-8a01-4984-94fd-ec300a16fac5.jpg?v=1793317427"},{"product_id":"verus-engineering-dual-element-dive-plane-kit-a0427a","title":"Verus Engineering Dual Element Dive Plane Kit A0427A","description":"\u003cp\u003eThe Verus Engineering Dual Dive Planes Kit for the  Porsche 992 GT3 was specifically designed to increase front-end downforce while keeping drag increase to a minimum.  The units work together to aid in extracting airflow from the wheel well, as well as produce downforce themselves on the front axle of the car. These are great for balancing out the increased AOA rear wing mounts that are also available for this car.\u003c\/p\u003e\n\n\u003cp\u003eAs a driver, if you feel the car needs a slight increase in front end grip at speed, the dive planes would likely be a great addition. These units were designed in CAD using in-house scan data and optimized using CFD analysis.\u003c\/p\u003e\n\n\u003cp\u003eThese units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon, with a polished, high gloss finish.\u003c\/p\u003e\n\n\u003cp\u003eDive planes also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing, diffuser, or aiding with front grip in on track.\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":67907758096704,"sku":"A0427A","price":2203.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/Dive_20Plane_20Kit_2C_20Dual_20Elements_20-_20Porsche_20992_20GT3.jpg?v=1793317428"},{"product_id":"verus-engineering-oem-wing-angle-adjustment-kit-a0443a","title":"Verus Engineering OEM Wing Angle Adjustment Kit A0443A","description":"\u003cp\u003eThe Verus Engineering Increased AOA (Angle Of Attack) Mount Kit replaces the factory mounts and allows for a wider range of angles with the OEM wing blade. This means more rear downforce from the factory wing, while retaining OEM adjustment, OEM looks, and OEM feel. The units bolt onto the carbon wing exactly like the OEM units are are produced in house on our 5-axis CNC mills out of 6061-T6 aluminum.\u003c\/p\u003e\n\n\u003cp\u003eUtilizing state-of-the-art analysis software during the R\u0026amp;D process, we were able to ensure that the OEM wing improved performance by increasing the AOA (Angle of Attack). Using in house scan data during the design process, we were able to design the wing mounts with aesthetics that follow the factory Porsche design language and bolts on like an OEM piece.\u003c\/p\u003e\n\n\u003cp\u003eThese units are great for owners that believe the car to need a slight bump in rear downforce to settle the car at speed, or as part of our Ventus 1 package that offers a slight bump in overall vehicle downforce, front and rear. Add performance, improved aesthetics, and function to your 992 GT3 with these simple to bolt on units.\u003c\/p\u003e","brand":"Verus Engineering","offers":[{"title":"Default Title","offer_id":67907758326080,"sku":"A0443A","price":1773.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/1152\/0064\/files\/OEM_20Mount_20Kit_20-_20Porsche_20992_20GT3.jpg?v=1793317430"}],"url":"https:\/\/shop.vctrperformance.com\/collections\/chassis-porsche-992.oembed","provider":"VCTR","version":"1.0","type":"link"}