Whiteline Rear Control Arm Inner And Outer Bushing

Whiteline Rear Control Arm Inner And Outer Bushing W63366

$334.95
$334.95
Skip to product information
Whiteline Rear Control Arm Inner And Outer Bushing
  • Whiteline Rear Control Arm Inner And Outer Bushing
  • Whiteline Rear Control Arm Inner And Outer Bushing
  • Whiteline Rear Control Arm Inner And Outer Bushing
Whiteline Rear Control Arm Inner And Outer Bushing W63366

Whiteline Rear Control Arm Inner And Outer Bushing W63366

$334.95
$334.95
 

IRS Commodores suffer from uneven rear tyre wear especially when lowered or when towing. The Whiteline 2 point camber / toe correction kits improve rear wheel alignment settings and saves you on replacing costly tyres.

 

Features:

  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
  • Internal grease reservoirs provide continual self-lubrication for optimum friction management.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase .
  • This Whiteline kit is covered by a limited lifetime warranty including parts and labour.

    •  

    Kit Includes:

  • 8 Bushings, 4 Tubes, 6 Bolts, 6 Washers, 4 Nuts, Install Guide, Grease

    •  

    Alignment Change:

  • Camber/Toe

    •  

    Service Kit:

  • N/A

    •  

    Installation:

  • Fitment Time (Hours): N/A
  • Degree Of Fitment Difficulty: N/A
  • Fitment Notes: Refer Install Guide
  • Wheel Alignment Required: No

    •  

    Vehicle Fitment and Important Notes:

  • 1991-1998 HOLDEN CALIBRA YE 4/6CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1990-1994 HOLDEN CAPRICE VQ 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1994-1999 HOLDEN CAPRICE VR, VS 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1999-2003 HOLDEN CAPRICE WH 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1988-1993 HOLDEN COMMODORE VN, VP, VG 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1993-1997 HOLDEN COMMODORE VR, VS 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1997-2002 HOLDEN COMMODORE VT, VX, VU 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1990-1994 HOLDEN STATESMAN VQ 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1994-1999 HOLDEN STATESMAN VR, VS 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1999-2003 HOLDEN STATESMAN WH 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1994-1999 HSV CAPRICE VR, VS 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1993-1994 HSV CLUBSPORT SV VP 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1993-1997 HSV CLUBSPORT VR, VS 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1997-2002 HSV CLUBSPORT VT, VX 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1996-1998 HSV GRANGE VS 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1999-2003 HSV GRANGE WH 6/8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1992-1992 HSV GTS VP 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1994-1997 HSV GTS VR, VS 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1997-2000 HSV GTS VT 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 2000-2001 HSV GTS VX 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 2001-2002 HSV MALOO VU 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1995-1997 HSV MANTA VS 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1997-1999 HSV MANTA VT 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1992-1993 HSV SENATOR VP 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1993-1997 HSV SENATOR VR, VS 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1997-2002 HSV SENATOR VT, VX 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1990-1994 HSV STATESMAN VP, VQ, SV90, SV91, SV93 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1994-1999 HSV STATESMAN VR, VS 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1999-2000 HSV SV99 VT 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 2001-2001 HSV SV300 VX 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1998-2002 HSV XU6 VT, VX 6CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1999-1999 HSV XU8 VT 8CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1988-1993 TOYOTA LEXCEN VN, VP 6CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
  • 1993-1997 TOYOTA LEXCEN VR, VS 6CYL (Single/2 bolt design - lowered vehicles - offers 14-16mm toe and +/- 2deg camber adjustment)
    •  

    Intentional design

    We make things that work better and last longer. Our products solve real problems with clean design.

    Quality first

    We obsess over the details and strive to deliver the best products at the best prices, every time.

    Customer care

    We're always on your side: keeping our loyal customers happy is our top priority and number one goal.

    Feature 1

    Made with care and unconditionally loved by our customers, this signature bestseller exceeds all expectations.

    Feature 2

    Made with care and unconditionally loved by our customers, this signature bestseller exceeds all expectations.

    At the heart of every product lies a unique story, driven by our passion for quality and innovation. Each item enhances your everyday life and sparks joy.